Installation Guide

PIVOT MOUNT
110mm
(4.3 in)
156mm
(6.14 in)
220mm
(8.66 in)
Designed for installation on shingled
roofs, recommend installing closer to
edge for cable routing. Not recommended
for tile, slate, and clay roofing.
For best results, Starlink should be
installed as close to vertical as possible.
Tools Needed:
Drill, 5/32” (4 mm) Drill Bit, 1/2” (12.7 mm) Socket Wrench
Package Dimensions:
9.7” x 5.5” x 3.1” / 24.7 x 14 x 7.9 cm
Package Weight: 2.21 lbs / 1.0 kg
Compatibility: Rectangular Starlink