Installation Instructions

4
This document contains instructions for connecting TruLink
Programmer into your laptop or desktop PC via a USB
connection. TruLink Programmer requires that Inspire
®
2014.2
fitting software or higher is installed.
DESCRIPTION
TruLink Programmer is a USB hearing aid programmer
functioning as the interface between wireless hearing aids and
computer fitting software. It consists of a USB docking station
and TruLink programmer dongle.
INSTALLATION
NOTE: Screen may vary depending on the Windows
®
version.
1. Confirm that Inspire 2014.2 or higher is installed.
(TruLink Programmer is not supported on earlier
versions of Inspire fitting software.)
2. Insert the USB cable of the docking station into an
open USB port on your PC.
NOTE: It is strongly recommended to use the
programmer as it is assembled (dongle plus USB
docking station). Plugging the dongle directly into the
computer is not recommended.