PROGRAMMER INSTALLATION INSTRUCTIONS
TABLE OF CONTENTS Description ������������������������������������������������������������������������������� 4 Installation �������������������������������������������������������������������������������� 4 Operation ��������������������������������������������������������������������������������� 5 Safety Precautions ������������������������������������������������������������������� 6 Regulatory & Service Information ������������������������������������������ 6 Important Safety and Usage Information ����
This document contains instructions for connecting TruLink Programmer into your laptop or desktop PC via a USB connection. TruLink Programmer requires that Inspire® 2014.2 fitting software or higher is installed. DESCRIPTION TruLink Programmer is a USB hearing aid programmer functioning as the interface between wireless hearing aids and computer fitting software. It consists of a USB docking station and TruLink programmer dongle. INSTALLATION NOTE: Screen may vary depending on the Windows® version. 1.
3. TruLink Programmer is designed to be “plug and play” and does not require a CD or a restart of the PC. Device drivers will install automatically. OPERATION Once installed, TruLink Programmer is ready to use. To use: 1. Verify TruLink Programmer is connected to the PC 2. Launch Inspire 2014.2 or higher 3.
SAFETY PRECAUTIONS Please read the following safety precautions before using TruLink Programmer for the first time. Markings and Symbols The following markings and symbols are used in these safety precautions and/or on the device label. Within Europe, dispose of TruLink Programmer according to local EU WEEE regulations. REGULATORY AND SERVICE INFORMATION Classification • C lassification to EN 60950-1 Class II Continuous Operation.
IMPORTANT SAFETY AND USAGE INFORMATION Storage and Shipping Conditions: • Temperature: -40 to 85° C, -40 to 185° F • Humidity: 30 – 90% • No condensation Operating Conditions: • Temperature: -40 to 85° C, -40 to 185° F • Humidity: 30 – 90% • No condensation Avoid using TruLink Programmer in areas subject to the following conditions: • Extreme heat or cold • Static electricity • Large amounts of dust • Rough handling Rough handling or dropping TruLink Programmer can cause damage.
DO NOT continue to use a damaged TruLink Programmer. DO NOT place heavy objects on top of TruLink Programmer. Never insert foreign objects into the connections. Avoid spilling liquid on TruLink Programmer. The exterior of TruLink Programmer may be wiped with a damp cloth or sterile hand wipe. Never use paint thinner, benzene, cosmetics or other volatile agents to clean the exterior of TruLink Programmer. Never try to take apart or modify TruLink Programmer.
REGULATORY NOTICES FCC ID: QOQBLED112 IC: 5123A-BGBLED112 KCC: CRM-BGT-BLED112 R 003 WW A111471 FCC NOTICE This device complies with part 15 of the FCC rules and with RSS-210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Paradigm, Inc. 6700 Washington Ave. South Eden Prairie, MN 55344 USA EC REP Paradigm, Inc. European Headquarters Wm. F. Austin House, Bramhall Technology Park Pepper Road, Hazel Grove, Stockport SK7 5BX United Kingdom Waste from electronic equipment must be handled according to local regulations. © 2014 Paradigm, Inc. All Rights Reserved. 81356-007 2/14 BKLT2678-01-EE-XX Rev.
