User Guide

If you will not be wearing your hearing aids for an
extended period of time (i.e, weeks), remove both
the plug from the charger (model dependent) and the
hearing aids from the charging posts. You will need to
manually power off the hearing aids by pressing the
user control on each hearing aid for three seconds.
Charging occurs with the lid open or closed; hearing
aids will be fully charged in under 3 1/2 hours.
It is safe to store hearing aids in the charger after they
are fully charged and any time that you are not wearing
them.
Hearing aids will automatically power on when
removed from the charger.
For premium charger with on-board battery only:
To illuminate LEDs when the charger is not plugged in,
remove a hearing aid from its charging post for three
seconds and then re-insert it. LEDs illuminate for 10
seconds before turning off.
When charging without the charger cord, the LEDs turn
off when the hearing aids are fully charged to preserve
the on-board battery.
Charging Your Hearing Aids
Place your hearing aids in the charger with
the faceplate facing downward so battery
contacts on hearing aid align with charging posts
within charger.
Your hearing aids will turn off automatically
and begin to charge, as long as your charger is
powered.
Note: The LEDs corresponding to each
hearing aid:
Glowing Green = Charging
Solid Green = Fully Charged
Blinking Red = Fault State. To reset, remove
the hearing aids from charger, wait until LED
turns off and re-insert aids. If Fault State
continues, call your hearing professional.
4 5