User's Manual

2 3 4 5 6 7 8 9
1) Special Feature
2) Memory/Program
Operations Manual
WATCH
Table of Contents
Overview
SurfLink Watch Overview 4
Operation
Modifying Date and Time 6
Toggle Between Seconds View and Date View 6
Illuminate Display 7
Generate Unique Address Code
for Pairing with Hearing Devices 7
Battery Replacement 10
Watch Care 13
FCC Information 14
Overview
The SurfLink Watch features:
• Remote control
• A watch
• 12/24-hour time formats
• American/International date formats
Overview
3) Volume Increase
4) Home/Reset
5) Volume Decrease
Overview
1) Special Feature
Functionality
Press STAR (
). This button may have
different functionality depending on the
hearing device setup performed by your
hearing professional.
2) Memory or Program
Change
Press PROGRAM (
). Repeat as needed.
3) Volume Increase
Press VOLUME UP (
).
Repeat as needed.
4) Home or Hearing
Device Reset
Press RESET (
). Hearing devices will
return to their power-up settings.
5) Volume Decrease
Press VOLUME DOWN (
).
Repeat as needed.
Operation
Modifying Time and Date
A. Press and hold SET ( ) for 3 seconds. HOURS digits will  ash.
B. Press UP (
) to advance. Go through 12 hours for AM or PM.
C. Press MODE (
) to select MINUTES, then UP ( ) to advance.
D. Repeat to set SECONDS, YEAR, MONTH, DAY, 12/24-hour TIME
display, and Month-Day/Day-Month DATE display.
E. Press SET (
) when done.
Toggle Between Seconds View And Date View
A. Press and hold MODE ( ) until display changes (about 3 seconds).
Operation
Illuminate Display
Display illumination becomes visible in low light situations.
A. Press and hold LIGHT (
) for at least 1 second to illuminate
watch face.
B. Note: Pressing LIGHT ( ) for less than 1 second may cause hearing
devices to return to their power-up settings.
Generate Unique Address Code for Pairing with
Hearing Devices
Watch Only: This allows a hearing professional to generate a unique
address code, which is used during a programming session, to pair the
SurfLink Watch with your individual hearing devices.
Operation
A. Press and hold MODE ( ) until 6-digit address appears
(about 10 seconds).
B. Write down 6-digit address displayed on your watch and give to
your hearing professional.
C. Press SET ( ) when done.
Watch Plus Another Watch Control: If you already use another Watch
control, such as a SurfLink Watch with your wireless hearing devices, a
hearing professional can adjust the watch’s address code to match your
existing Watch control. Both Watch controls can then make hearing
device adjustments.
A. Press and hold MODE (
) until 6-digit address appears
(about 10 seconds).
Operation
B. To match another Watch control pairing address,
press UP (
) to advance.
C. Press MODE (
) to advance to next address fi eld,
then UP (
) to advance.
D. Repeat until 6-digit address matches the other Watch control.
E. Press SET (
) when done.