User Manual

Transmitter/Receiver RF Information
In Europe, the SurfLink Programmer operates in
the 863-865 MHz band, with a 300 kHz necessary
transmit bandwidth and a 500 kHz receive
bandwidth, using GFSK FM modulation with an
effective radiated power of 7 dBm.
In North America, the SurfLink Programmer
operates in the 902-928 MHz band, with a 508
kHz necessary transmit bandwidth and a 500 kHz
receive bandwidth, using GFSK FM modulation
with an effective radiated power of 7 dBm.
SurfLink Programmer has been tested to, and has
passed, the following emissions and immunity
tests:
• IEC 60601-1-2 radiated and conducted
emissions requirements for a Group 1 Class B
device as stated in CISPR 11.
• Harmonic distortion and voltage fluctuations
affecting the power input source as stated in
Table 2 of IEC 60601-1-2.
• RF radiated immunity at a field level of 10
V/m between 80 MHz and 2.7 GHz as well as
higher field levels from communications
devices as stated in Table 9 of IEC 60601-1-2.
• Immunity to power frequency magnetic fields
at a field level of 30 A/m.
• Immunity to proximity magnetic fields as
stated in Table 11 of IEC 60601-1-2.
• Immunity to ESD levels of +/- 8 kV conducted
discharge and +/- 15 kV air discharge.
• Immunity to electrical fast transients on the
power input at a level of +/- 2 kV at a 100 Hz
repetition rate.
• Immunity to surges on the power input of +/-
1 kV line to line.
• Immunity to conducted disturbances induced
by RF fields on the power input as stated in
Table 6 of IEC 60601-1-2.
• Immunity to voltage dips and interruptions on
the power input as stated in Table 6 of IEC
60601-1-2.
12 13