User's Manual

6 7

IMPORTANT SAFETY AND USAGE INFORMATION

Storage and Shipping Conditions:

• Temperature: -20 to 70° C, -4 to 158° F

• Humidity: 30 – 90%

• No condensation

Operating Conditions:

• Temperature: 15 - 35° C, 59 - 95° F

• Humidity: 30 – 90%

• No condensation

Avoid using SurfLink Programmer in areas subject to the

following conditions:

• Extreme heat or cold

• Static electricity

• Large amounts of dust

• Rough handling

Rough handling or dropping SurfLink Programmer can

cause damage. If you think you may have damaged SurfLink

Programmer, or if SurfLink Programmer is suffering an obvious

malfunction, immediately unplug it from your computer and

contact your authorized dealer to request servicing.

DO NOT continue to use a damaged SurfLink Programmer.

DO NOT place heavy objects on top of SurfLink Programmer.

Never insert foreign objects into the connections.

Avoid spilling liquid on SurfLink Programmer.

The exterior of SurfLink Programmer may be wiped with a damp

cloth or sterile hand wipe. Never use paint thinner, benzene,

cosmetics, or other volatile agents to clean the exterior of SurfLink

Programmer.

Never try to take apart or modify SurfLink Programmer. Doing so

creates the danger of ﬁre and electrical shock, as well as SurfLink

Programmer malfunction. There are no user-serviceable parts

inside SurfLink Programmer. All services must be performed by the

authorized dealer.

Please be aware that portable and mobile RF communications

equipment can affect medical electrical equipment.

Caution: SurfLink Programmer should not be used adjacent to

or stacked with other equipment. If stacked or adjacent use is

necessary, check to make sure SurfLink Programmer is operating

normally.