User's Manual

2 3
This document contains instructions for connecting SurfLink
Programmer into your laptop or desktop PC via a USB connection.
SurfLink Programmer requires that Inspire
®
2011 fitting software or
higher is installed.
DESCRIPTION
SurfLink Programmer is a USB hearing aid programmer functioning
as the interface between wireless hearing aids and computer fitting
software. It consists of a USB cable and SurfLink Programmer.
Physical and Performance Characteristics:
• Indicator lights for power and data transfer activity
• SurfLink Programmer to PC connection on USB is capable of up
to 480 Mbps (USB 2.0 high speed)
INSTALLATION
Screen may vary depending on the Windows version.
1. Confirm that Inspire 2011 or higher is installed. (SurfLink
Programmer is not supported on earlier versions of Inspire
fitting software.)
2. Plug the square end of the USB cable into the back of SurfLink
Programmer making sure it is inserted fully.
3. Insert the rectangular end of the USB cable into an open USB
port on your PC.
4. Follow the on-screen prompts in the “Add New Hardware
Wizard” screens. SurfLink Programmer is designed to be
“plug and play” and does not require a CD or a restart of
the PC.
5. Locate SurfLink Programmer at least 5 feet/1.5 meters from
the patient.
OPERATION
Once installed, SurfLink Programmer is ready to use.
To use:
1. Verify SurfLink Programmer is connected to the PC
2. Launch Inspire 2011
3. Search for SurfLink Programmer, if needed