User's Manual

6 7
Connecting SurfLink Media and Media Source
Optical/TOSLINK Installation
 1. Connecttheoptical/TOSLINKcableintotheoptical/TOSLINK
“AUDIOOUT”port(labeled3)onthemediasource.
 2. SelectthesignaltypeasMonauralorBinauralaudio
stream based on your hearing system confi guration.
Monaural if you are wearing one hearing instrument.
Binaural if you are wearing two hearing instruments.
 3. Connecttheoppositeendoftheoptical/
TOSLINK cable into the optical/TOSLINK
port on the back of SurfLink Media.
4. Place SurfLink Media in a desired
location that is in close proximity to
the media source.
Once SurfLink Media has been turned on
it will begin to stream the audio signal.
Connecting SurfLink Media and Media Source
External Microphone Installation
In the instance your television does not support the cable installation options listed
on the previous pages, an external microphone can be used.
 1. Connectthemicrophonecableintothemicrophone
port(labeled1)onthebackofSurfLinkMedia.
 2. SelectthesignaltypeasMonauralorBinauralaudio
stream based on your hearing system confi guration.
Monaural if you are wearing one hearing instrument.
Binaural if you are wearing two hearing instruments.
3. Place the microphone as close as
possibletothespeaker(s)ofthe
desired media source.
Once SurfLink Media has been turned on on
it will begin to stream the audio signal.
Television with External
Microphone Confi guration
Power Streaming Activation
Control
Volume Control
Microphone RCA Jacks
Optical S/PDIF Monaural/Binaural Power
TOSLINK Selection
Optical S/PDIF Monaural/Binaural Power
SLINK Selection
Power Streaming Activation
Control
Volume Control
Microphone RCA Jacks
Optical S/PDIF Monaural/Binaural Power
TOSLINK Selection
Optical S/PDIF Monaural/Binaural Power
SLINK Selection