User's Manual

4 5
Connecting SurfLink Media and Media Source
RCA Cable Installation (most common connection option)
 1. ConnecttheredandwhiteRCAcableplugsintothecorresponding
redandwhiteRCAjacks(labeled2)onSurfLinkMedia.
 2. SelectthesignaltypeasMonauralorBinauralaudio
stream based on your hearing system confi guration.
Monaural if you are wearing one hearing instrument.
Binaural if you are wearing two hearing instruments.
 3. Connecttheoppositeendoftheredand
whiteRCAcablejacksintothecorresponding
redandwhiteRCA“AUDIOOUT”jackson
the media source.
4. Place SurfLink Media in a desired location
that is in close proximity to the media source.
Once SurfLink Media has been turned on it will begin to stream the audio signal.
Connecting SurfLink Media and Media Source
S/PDIF Installation
 1. ConnecttheorangeS/PDIFcableintotheorangeS/PDIF“AUDIOOUT”port(labeled4)
on the media source.
 2. SelectthesignaltypeasMonauralorBinauralaudio
stream based on your hearing system confi guration.
Monaural if you are wearing one hearing instrument.
Binaural if you are wearing two hearing instruments.
 3. Connecttheoppositeendoftheorange
S/PDIF cable into the orange S/PDIF port
on the back of SurfLink Media.
4. Place SurfLink Media in a desired location
that is in close proximity to the media
source.
Once SurfLink Media has been turned on it will begin to stream the audio signal.
Power Streaming Activation
Control
Volume Control
Microphone RCA Jacks
Optical S/PDIF Monaural/Binaural Power
TOSLINK Selection
Optical S/PDIF Monaural/Binaural Power
SLINK Selection
Power Streaming Activation
Control
Volume Control
Microphone RCA Jacks
Optical S/PDIF Monaural/Binaural Power
TOSLINK Selection
Optical S/PDIF Monaural/Binaural Power
SLINK Selection