User's Manual

27
1
2
1
Hearing Instrument Care
Standard Tubing
1. Separate the Custom Earmold
from the BTE by gently pulling
the tubing away from the
earhook.
– Use a soft, damp cloth or
a cleaning brush to clean
debris from the Custom
Earmold
– Wash the Custom Earmold
with warm soapy water
– Never use solvents
2. Slide the Custom Earmold
tubing onto the BTE earhook
when completely dry.
Your hearing professional can provide further
information on additional maintenance procedures
for your hearing instrument, if needed.
Thin Tubing
1. Unscrew the tubing from the
tip of the hearing instrument.
2. Thread cleaner through
the tubing, starting at the
end just removed from the
hearing instrument, until it
extends from the other end
of the tubing.