User's Manual

10
Preparation
Insertion and Removal
To insert the Custom Earmold
and hearing instrument:
1. Hold the Custom Earmold with your thumb and
forefinger on the outer side near the tubing.
2. Tilt your hand slightly forward and gently insert
the canal tip of the Custom Earmold into your
ear canal.
3. Rotate the Custom Earmold backward.
4. Softly press the Custom Earmold into place
with your fingertip.
5. Carefully place the BTE behind your ear wrapping
the earhook over the top of your ear.
To remove the hearing instrument
and Custom Earmold:
Take the instrument from behind your ear and gently
pull the Custom Earmold outward. Pulling lightly down
on the earlobe may help loosen the Custom Earmold
as it is removed.