User's Manual

16 17
Operation
Operation
On & Off
To turn ON: Insert a battery and completely close
the battery door.
To turn OFF:
Open the battery door until the battery is
no longer touching the battery contacts.
Your instrument has a Power-On delay and may require
a few seconds to power on. You may hear a tone series
indicating that your device is fully powered on.
Volume Control
Automatic Volume Control
Your hearing system has been set to a specific volume
level by your hearing care professional. If sounds are
generally too loud or too soft, please contact your
hearing care professional for advice and adjustment.
Adjustable Volume Control
Push Button/Control Surface Volume Control
Your hearing system uses the control surface/push button
to control volume. To change volume, press then release
the control surface/push button.
Rocker Switch Volume Control
Your hearing system uses the rocker switch
to control volume. To increase volume,
press then release the top part of the
switch. To decrease volume, press then
release the bottom part of the switch.
Volume Level Tone
Level 5 (More volume) Five beeps plus tone
Level 4 Four beeps
Level 3 (Power on volume level) Three beeps
Level 2 Two beeps
Level 1 (Less volume) One beep plus tone
Volume Level Tone
Optimal volume setting One beep
Rotary Volume Control
Your hearing system uses a rotary volume
control to adjust volume.Turn the wheel
up (higher number) to increase volume.
Turn the wheel down (lower number) to
decrease volume.
Volume Settings
Some hearing systems can be set for the Right device
to increase the volume and the Left device to decrease
the volume. Ask your hearing care professional if this
setting would benefit you.
Push Button/Rocker Switch/Control Surface Volume Control
Rotary Volume Control