Operations Manual

Pairing | 13 12 | Pairing
5. For a set of hearing aids:
6. For a single hearing aid:
Pairing with Bluetooth Devices
For Starkey Hearing Technologies Remote
Microphone + to wirelessly receive audio from
your Bluetooth device, you must first pair them:
1. Ensure the Remote Mic + is
powered on and not Bluetooth-
connected to other devices (the
green LED will be slowly pulsing).
2. Press the Input Mode and
Volume Down (-) buttons
simultaneously for 7
seconds until the LED status
indicator rapidly blinks blue.
3. Put your Bluetooth device
into pairing mode. When
Remote Mic + appears,
select it.
• Note: Review your Bluetooth
device operations manual for
more details.
4. The Remote Mic + LED provides the
pairing status:
• Successful – green LED for 2 seconds
• Unsuccessful – red LED for 2 seconds
Volume −
Input
Mode
LED blink Pairing Result Next Step
Successful Complete
Unsuccessful Repeat steps 1 – 4
and 6
First LED
blink
Second
LED blink
Pairing Result Next Step
Both hearing aids
paired
Complete
Only one hearing
aid paired
Repeat steps
1 – 5
n/a
No hearing aids
paired
Repeat steps
1 – 5