Operations Manual

Pairing | 11
Wearing the Remote Mic +
Starkey Hearing Technologies
Remote Microphone + can be
affixed to clothing or worn on
a lanyard. When your audio
source is the Remote Mic or
a Bluetooth device in phone
mode , the Remote Mic +
should be within 8 inches
(20cm) of the speaker’s mouth.
Clip – Press the clip as shown. Slide
clip opening onto clothing and
release clip. Ensure the Remote Mic +
is securely affixed to clothing.
Lanyard (optional) –
1. Gently press the clip as shown.
2. Insert lanyard loop into clip
opening and lift loop toward top
of clip. Release clip. Ensure the
lanyard is securely attached to
the Remote Mic +.
3. Place lanyard around neck.
Pairing with Hearing Aids
For Starkey Hearing Technologies Remote
Microphone + to interact with your hearing aid(s),
you must first pair the Remote Mic + with each
hearing aid. You only need to perform this action one
time, as they should automatically recognize each
other when both are powered on and within wireless
operating range.*
To pair the Remote Mic + with your hearing aid(s):
1. Ensure your hearing aids are not connected to
nearby Bluetooth devices. To do this,
• Disable Bluetooth on your mobile phone.
• Power off any nearby Starkey Hearing
Technologies TV or Remote Mic + accessories,
which you previously paired to your hearing aids.
2. Power off, then power on your hearing aids.
3. Place your hearing aids within 6 inches (15 cm)
of the Remote Mic +.
4. Press the Input Mode and
Volume Up (+) buttons
simultaneously for 7
seconds until the LED
status indicator alternately
blinks blue and red.
Volume +
Input
Mode
*Typical operating range is up to 10 meters (~30 feet). Operational range may be
reduced by environmental factors, such as obstructions, interference, and human
body positioning. Larger operational distances are achievable, though audio quality
and connectivity may decrease.
10 | Wearing the Remote Mic +