Operations Manual

Basic Use | 7 6 | Basic Use
Basic Use
1. To turn on Starkey Hearing
Technologies Remote
Microphone +, press the
multi-function button for
2 seconds and release when
the green LED appears.
2. Ensure your hearing aids are
powered on.
• Note: Prior to streaming
audio for the first time, your
hearing aids will need to be
paired to the Remote Mic +.
Refer to Pairing with Hearing
Aids on page 11.
3. To start audio streaming,
• Open Thrive Hearing Control and select
Start Streaming.
• Refer to Start/Stop Audio Streaming
on page 18 for additional options.
4. To change the audio source,
press and release the input
mode button. Repeat until you
reach the desired input mode.
5. To access audio from a
Bluetooth device , it
must be connected to the
Remote Mic + (denoted
by a slow pulsing blue
status indicator LED).
• Note: Prior to streaming
Bluetooth audio for the first
time, pair your Bluetooth
device with the Remote
Mic +. Refer to Pairing
with Bluetooth Devices
on page 13.
6. To adjust the stream volume,
press the + or - button.
7. To stop streaming, do one of
the following:
• Turn off the Remote Mic +.
• Open Thrive Hearing Control and select Stop
Streaming.
• Refer to Start/Stop Audio Streaming
on page 18 for additional options.
2
5
4
1
6