Operations Manual

Teleloop System/FM System/Line-In | 17 16 | Bluetooth Phone and Audio
Change to
Bluetooth Audio
Source
When Starkey Hearing Technologies Remote
Microphone + detects an incoming or
outgoing phone call, it automatically changes
to the Bluetooth audio source.
Accept Incoming
Call
When you hear the ringtone
in your hearing aids, briefly
press the multi-function
button.
Reject Incoming
Call
When you hear the ringtone
in your hearing aids, press
the multi-function button
for more than 2 seconds.
Release the button after the
ringtone stops.
End Call During active phone call,
briefly press the multi-
function button.
Transfer Call
between mobile
phone and
Remote Mic +
During active phone call,
press the multi-function
button for more than 2
seconds. This lets you
directly conduct the call on
the phone itself. Re-press
the button for more than 2
seconds to move the call
back to the Remote Mic +.
Make an
Outgoing Call
Dial the phone number on your Bluetooth
device. The phone call will be automatically
routed to your hearing aids.
Phone Call Features
Teleloop System
Starkey Hearing Technologies Remote
Microphone + can receive audio from
a teleloop system (available in some
schools, theaters, places of worship,
etc.). Wearing the Remote Mic + in
a vertical orientation provides best
performance.
FM System
When an optional FM transmitter is
attached via the Europin connector,
Starkey Hearing Technologies
Remote Microphone + can receive
audio from a FM system. In this
mode, the user can wear the
Remote Mic + or place the Remote
Mic + on a nearby stable surface.
Line-In
When an optional Line-In cable is
attached via the microUSB jack,
Starkey Hearing Technologies
Remote Microphone + can obtain
audio from a non-Bluetooth-
enabled mobile phone, MP3 player,
tablet, or computer. In this mode,
the user typically places the Remote
Mic + on a nearby stable surface.