Troubleshooting Guide

Volume Level
T one
Volume Max
5 Beeps •••••
Volume Step(s)
Short Tone –
Volume Home (Power-on volume level)
3 Beeps •••
Volume Step(s)
Short Tone –
Volume Min
Single Beep •
16 | Operation Operation | 17
Up/Down Volume Control
If your user control is configured as a dedicated up/
down volume control, each time you activate the
user control, the volume of your hearing aid always
changes in a specific direction (either up or down) .
For example, a short press and release may increase
the volume while a long press and hold may decrease
the volume in your hearing aid .
Some user controls can be set for the Right hearing
aid to increase volume and the Left hearing aid to
decrease volume . Ask your hearing professional if this
setting would benefit you .
Volume Control Indicators
Your hearing professional may enable audible
indicators, which highlight the current volume position.
My hearing aid is configured with the following control:
Press and Release Volume Control
Press and Hold Volume Control
Battery Indicators
An indicator will sound when the battery voltage is
low � You have approximately 30 minutes* of battery life
r emaining . An indicator may also sound just before the
battery stops working .
*Actual time between low battery indicator and shut down will vary depending
on environmental noise levels and your use of the product.