Operations Manual

5
Preparation | 11 10 | Preparation
1
2
3
4
Insertion and Removal
To insert the custom earmold and hearing aid:
1. Hold the custom earmold with your thumb and
forefinger on the outer side near the tubing.
2. Tilt your hand slightly forward and gently insert
the canal tip of the custom earmold into your
ear canal.
3. Rotate the custom earmold backward.
4. Softly press the custom earmold into place with
your fingertip.
5. Carefully place the BTE behind your ear wrapping
the earhook over the top of your ear.
To remove the hearing aid and custom earmold:
Take the hearing aid from behind your ear and
gently pull the custom earmold outward. Pulling lightly
down on the earlobe may help loosen the custom
earmold as it is removed.