Operations Manual

21
4
3
5
Preparation | 7 6 | Preparation
Batteries
Your hearing aid uses a battery as its power source.
The battery size can be identified by the orange (13)
color code on the packaging.
To insert or replace the battery:
1. Use the finger pick on the battery door.
2. Open the battery door gently and remove the
old battery.
3. Remove the colored tab from the new battery.
Wait 3-5 minutes after removing tab before
inserting battery.
4. Line up the battery’s “+” sign (flat side of the
battery) with the “+” on the battery door.
5. Close the battery door.
Battery Indicators
An indicator will sound when the battery voltage
is low. You then have approximately 30 minutes
*
to replace the battery. An indicator may also sound
just before the battery stops working.
* Actual time between low battery indicator and shut down will vary depending on
environmental noise levels and brand of battery used.