Operations Manual

Hearing Aid Care | 31 30 | Hearing Aid Care
Standard Tubing
1. Separate the custom
earmold from the BTE
by gently pulling the
tubing away from the
earhook.
• Use a soft, damp
cloth or a cleaning
brush to clean debris
from the custom
earmold
• Wash the custom
earmold with warm
soapy water
• Never use solvents
2. Slide the custom earmold tubing onto the BTE
earhook when completely dry.
Your hearing professional can provide further
information on additional maintenance procedures
for your hearing aid, if needed.
Thin Tubing
1. Unscrew the tubing from
the tip of the hearing aid.
2. Thread the cleaner
through the tubing,
starting at the end just
removed from the hearing
aid, until it extends from
the other end of the tubing.
3. Brush the debris off prior to removing the cleaner.
4. Clean the earbud with a dry cloth or brush.
5. If necessary, the earbud may be washed in
warm, soapy water. Remove the earbud
from the tubing prior to washing. Allow to
dry overnight.