Operations Manual

Adjustment | 25 24 | Adjustment
Pairing Your Hearing Aid with an iOS Device
To adjust your hearing aid with your iOS device, you
must pair the two together so they can communicate.
Please follow the instructions to pair your iOS device
and your hearing aid.
1. Ensure Bluetooth
®
is enabled on your iOS device.
Within the Settings menu go to Bluetooth and
toggle to On.
2. Locate, then tap the Settings icon on your
iOS device.
3. Within the Settings menu go to General >
Accessibility > MFi Hearing Devices.
4. While the iOS device searches for the hearing
aids, open and close the battery door on your
hearing aids. This puts the hearing aids in
pairing mode.
• You will see your hearing aid name (e.g. “Chris
Hearing Aids”) when the iOS device first
discovers your hearing aids.
• If your name does not appear in the “Devices”
list within 5-7 seconds, tap Accessibility in
the upper left corner, then tap MFi Hearing
Devices.
You are now ready to use your iOS device to adjust
your hearing aid. You can adjust either with the native
iOS controls or with the Thrive Hearing Control app.
To access the native iOS hearing aid controls, triple-
click the
Home button (On the iPhone 8 or earlier
versions. Please consult Apple support for iPhone X
options) on your iOS device. From this screen you can
adjust the volume, select memory or use your iOS
device as a remote microphone.
Select
Start Live Listen to stream the iOS device
microphone input directly into your hearing aid. Point
the iOS device microphone toward the audio source.
Select
Start Live Listen to stream the iOS device
microphone input directly into your hearing aid. Point
the iOS device microphone toward the audio source.
To minimize background noise and provide the best
signal, place the iOS device as close to the source
as possible.
Right Volume/Left Volume allows you to increase and
decrease volume for each hearing aid individually.
Turn off
Adjust Independently to make changes to
both hearing aids simultaneously.
Normal indicates the name of a memory setting in
the
hearing aid. You can select from any memories
shown in
the list to change the hearing aid to that
memory setting.