Operations Manual

Operation | 21 20 | Operation
Automatic Telephone Memory
and Automatic Telecoil
These options activate the telephone memory
automatically when used with a hearing aid
compatible telephone. To use, place the telephone
receiver on your ear as you normally would and
the hearing aid will automatically select the
telephone memory. It might be necessary to move
the telephone receiver slightly to find the best
reception. Once the telephone is removed from
the ear, the hearing aid will switch back to the last
used memory.
My hearing aids have the following telephone
setting(s):
Automatic Telephone Memory and Automatic
Telecoil. See below.
Manual Telephone Memory and
Manual Telecoil. See next page.
(Memory # ________________ )
None
NOTE: Consult with your hearing professional if your
hearing aid does not switch to the telephone memory
automatically, if it is enabled.
Manual Telephone Memory and Manual Telecoil
Manual access allows you to switch the hearing aids
into a telephone or telecoil memory, as needed.
Ask your hearing professional which memory you
should access for manual telephone use.
General Telephone Use
Some hearing aids work best
by holding the phone close
to, but not fully covering your
ear. In some instances, if you
encounter whistling (feedback),
tilt the receiver at an angle
until the whistling stops.
Additionally, the hearing aid
in the non-phone ear (ear
opposite the phone) may
switch to a telephone setting
to reduce background sounds.
Your hearing professional
can provide instructions
and techniques for your
specific needs.