User's Manual
14 15
Operation Operation
On & Off
To turn ON: Insert a battery and completely close the
battery door.
To turn OFF:
Open the battery door until the battery no longer
touches
the battery contacts.
Your instrument has a Power-On delay and may require a few
seconds to power on. You may hear a tone series indicating
that your device is powered on.
Adjusting Your Hearing System
Your Made for iPhone hearing system and TruLink
™
are
compatible with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPad
Air, iPad (4th generation), iPad mini with Retina display, iPad
mini, and iPod touch (5th generation).
To adjust your hearing system with your iOS Device:
• Ensure that the iOS device is running iOS 7.1 or higher.
•
Download the TruLink Hearing Control app from
the App Store
SM
or use the native iOS on your device (see
Pairing Your Hearing System to the iOS Device section below).
For more detailed information on hearing system functionality with
the app, open the app and touch the i icon. Detailed instructions
are located there.
Pairing Your Hearing Aids to the iOS Device
To adjust your hearing aids with your iOS device, you must ‘pair’
the two together so they can communicate. Please follow the
instructions to ‘pair’ your iOS device and your hearing aids.
1. Locate then tap the
Settings icon
on your iOS device.
2. Within the Settings menu go to
General > Accessibility > Hearing
Aids.
3. While the iOS device searches for
the hearing aids, open and close
the battery door on your hearing
aids (this puts the hearing aids
into ‘pairing’ mode).
4a. If your name does not appear in
the “Devices List” within
5-7 seconds, tap
Accessibility
in
the upper left corner, then tap
Hearing Aids
.
4b. You will see your first name and
hearing aid (e.g. “Matt Hearing
Aids” or “Matthew H/As”
depending on the length of the
first name) when the iOS device
first discovers the hearing aids.
5. Tap on the
Hearing Aid Name
to
connect the hearing aids to the
iOS device.
6.
You will see two pairing requests (one
for each hearing aid). Select Pair for
each request. These requests may be
several seconds apart.
7. Pairing is complete.
IMPORTANT: Before completing the following steps, ensure Bluetooth
®
is
enabled on your iOS device. Within the Settings menu, go to Bluetooth
and toggle to On.