User Manual

7
Safety Instruction
Attention! Observe the safety rules when using the machine to avoid
burning, electrical shock or other injuring.
1. Make sure that the voltage of the power supply network as well as operation
conditions conforms to those described in this manual. Be especially prudent when
working in the zone of electric circuit wiring.
2. Keep your working place in order – the mess brings about injuring.
3. Don’t use the machine in places of increased humidity. Don’t work in raining
conditions. Keep the poisoning or pungent liquids and gases away of your working
space.
4. Don’t touch grounded objects as water pipes, heaters etc. when working with the
machine.
5. Don’t allow children and unauthorized person in your working zone.
6. Don’t overload the machine. It reduces the life of machine and can lead to injures as
well.
7. Use the machine only for its intended purpose.
8. Don’t leave the machine working without care.
9. Choose the proper clothes. Hide long hairs under the cap. Use rubber gloves and
protective shoes when working outside.
10. Always use protective goggles while working. Use special protective mask if the dust
is generated abundantly.
11. Always carefully handle the electrical cable. Never carry the machine holding it for
the cable. Never pull out the cable from the power socket holding it. These actions
may bring about the electrical shock.
12. If the cable is damaged during work it is necessary to pull out the plug from power
socket not touching the cable. It is strictly prohibited to operate the machine with
damaged electrical cable.
13. Make sure that the machine is switched off when inserting the plug into power socket.
14. Be careful while working. Avoid working if you are tired.
15. Every time before switching on check all the working and protective parts. If any
damaged parts are discovered the repair works should be rendered in qualified service
center.