User Manual

6
During the operation
 during long work don’t allow overloading and overheating of the motor, make
work breaks;
 avoid mechanical damage of the machine;
 keep the machine away of intense heat sources and reactive materials, don’t allow
liquids and other matters come inside the machine;
 don’t not block ventilation slots in the housing;
 switch off the machine by the way of turning off the switch before disconnecting
the cable.
After work
 switch off the machine and disconnect the cable from the current source;
 clean the machine and accessories;
 keep the machine in conditions of temperature from +1°С to +35°С and humidity
not more than 80%.
Maintenance
For safe and reliable operation please remember that repairing, maintenance and
adjustment of the machine of Stark brand is to be made in the special service centers of
Stark company with applying only original spare parts.
Safety instruction when working with jigsaw
1. Avoid cutting nails. Inspect workpiece for any nails and remove them before
operation.
2. Do not cut hollow pipe.
3. Do not cut oversize workpiece.
4. Check for the proper clearance beyond the workpiece before cutting so that the blade
will not strike the floor, workbench, etc.
5. Hold the tool firmly.
6. Make sure the blade is not contacting the workpiece before the switch is turned on.
7. Keep hands away from moving parts.
8. Do not leave the tool running. Operate the tool only when hand-held.
9. Always switch off and wait for the blade to come to a complete stop before removing
the blade from the workpiece.
10. Do not touch the blade or the workpiece immediately after operation; they may be
extremely hot and could burn your skin.
11. Hold tool by insulated gripping surfaces when performing an operation where the
cutting tools may contact hidden wiring or its own cord. Contact with a “live” wire
will make exposed metal parts of the tool “live” and shock the operator.