User Manual

——Installation Guide（Fig .3）
Firstly, plug the connector on Dust Outlet directly into the interface
for Dust Collector (Item 5), and insert Component A directly and fix it
tightly with Component B.
——Dismantling Process（Fig .4）
Push down Component B with the multi-blade screwdriver
(accessory), or simply hold the right side of Component B, and then pull
out Dust Outlet assembly properly.
8. Procedures for Operated Switch (Fig .5)
Fig .5
Turn on / Turn off the drywall sander by switch
9. Control speed (Fig .5)
The Governor, as shown in Fig .5, may be used to Speed control
switch to adjust the speed, so as to facilitate the operations of workers and
improve work quality simultaneously.
10． Extend the drywall sander (Fig .6-7-8)