User Manual

4
Take a sanding belt of the required grain size and place it on the rollers. Make sure that the arrow
on the inside of the sanding belt points in the same direction as the arrow on the machine. Make
sure that the sanding belt is straight and centered on the rollers. Switch the machine on to let the
sanding belt run. With the machine switched on, turn the belt centering adjuster (4) until the
sanding belt keeps running straight.
The sanding belt must be fitted firmly on the sanding pad and should not come loose.
Switching ON/OFF
To switch on the machine press the ON/OFF switch (1). To switch off the machine, release the
ON/OFF switch (1).
To switch the machine to continuous mode, keep the ON/OFF switch (1) fully pressed and
simultaneously press the lock-on button (2). And subsequently release the ON/OFF switch. To
switch off continuous mode, press the on/off switch (1) again.
Never use the machine for sanding magnesium work-pieces.
During the operation
Hold the machine firmly with two hands and put it on the surface to be processed only when the
motor attains full speed.
 it is allowed to adjust the belt speed during machine’s work;
 during long work don’t allow overloading and overheating of the motor, make work
breaks;
 avoid mechanical damage of the machine;
 keep the machine away of intense heat sources and reactive materials, don’t allow liquids
and other matters come inside the machine;
 don’t not block ventilation slots in the housing;
 switch off the machine by the way of turning off the switch before disconnecting the cable;
 take care that the cable is in safe position and cannot be damaged by the sanding belt.
After work
 switch off the machine and disconnect the cable from the current source;
 clean the machine and accessories;
 keep the machine in conditions of temperature from +1°С to +35°С and humidity not more
than 80%.
Maintenance
For safe and reliable operation please remember that repairing, maintenance and adjustment of
the machine of Stark brand is to be made in the special service centers of Stark company with
applying only original spare parts.