User Manual

4
Fig 1.1 Side view of the machine AG 1350
1. Wheel guard.
2. Gear camera.
3. Shaft lock.
4. ON/OFF switch.
5. Switch fixator.
6. Disc.
Operating instruction
Damage of the disc is possible even if the safety instructions are observed.
ALWAYS USE THE WHEEL GUARD even if you are going to use the
machine for the short period of time.
Before work
Check network voltage: it should conform to the data on the machine’s label.
Tool labeled with the 230 V, can be also connected to a power source with a
voltage of 220 volts.
1
2
3
5
4
6