Installation Guide

INFORMATION

OPERATION PANEL

A. LCD display window

1. Unit ON or OFF state symbol: When the unit is turned off(standby mode), this symbol ashes, and

when the unit is working, the symbol will keep lighting on.

2. Ambient temperature and ice-making countdown time display

3. Ice-making setting and Timer setting display

4. Error code: E1 means that the ambient temperature sensor is faulted E2 means that ice-making process

is abnormal.

5. Light symbol: When this symbol displays, the LED light inside the cabinet will be on.

6. Water owing and water absence symbol: If the arrow of this symbol ashes, means the water is

owing in to the water tank; And if the whole symbol keeps on, means there is no enough water to start the

ice-making process.

7. Ice-full display: When the ice storage cabinet is full of the ice cube, this symbol will display, and the unit

will stop ice-making process.

8. Ice making and harvest display: When the ice cube symbol keep rotation, means the unit is making

the ice; And if the symbol ashes, means the unit is during the ice harvest process.

9. Self-cleaning display.

B: “LED light” button: To turn on or turn off the internal LED light;

NOTE: Keep pressing this button for more than 5 seconds, it is to change the ambient temperature unit

between Fahrenheit degree and Centigrade degree.

C: “Timer/Clean”button: Quickly press this button once, to enter the Timer setting program; And press

this button for more than 5 seconds, to let the unit enter the Self-Cleaning program.

D: “ON/OFF”button: When the unit is off, press this button to turn on the unit; And during the automatic-

cleaning program, or normal ice-making state, press this button to turn off the unit at once; And also if the

unit is set with the Timer, press this button to cancel the Timer setting.

When the unit is making the ice cube, press this button for more than 5 seconds, the unit will switch to ice

harvest process by force. E. Water Supplying Mode setting button: Use a thin pole to press this button, can

change the water supplying mode between manual supplying and automatic supplying. F. G: “+” “-” button:

Use to adjust the ice-making process duration period length, the default setting is zero, 1 minute adding or

decreasing per each pressing of “+” or “-” button.

Also to adjust the delay time of the timer, the default setting is zero, 1 hour adding or decreasing per each

pressing of “+” or “-” button.