Installation Guide

ICE-MAKER WATER TANK PARTS
INFORMATION
A. Water level switch installing plate
B. Water supplying pipe
C. Water charging tank: Approximate 3.5 litters volume
D. Water outlet control valve of water charging tank
E. Water tank for water circulation: Approximate 0.9 litters volume
F. Ice full detecting board: Use to detect the inner cabinet is full of ice or not, and to check the ice-harvest
process is over or not.
G. Water circulation pump
H. Water drain pipe of the water tank. When ice-making, this silicone pipe should be clamped in the slot of
the water tank wall; And when draining the water, this pipe should be pulled out and expand completely.
I. Ice full detector
J. Water level detecting switch
K. Evaporator (ice-making module)
L. Water dividing pipe: With eight little holes, water will ow out from these little holes. And if no water ows
out, can be disassembled and cleaned.
5