Manualshelf

Replacement Part List

ManualsBrandsStark ManualsChainsaws22 in. 45 cc 2-Stroke Gas Chainsaw Wood Cutter with Automatic Chain Oiler, EPA Certified
12345678910
6
FUEL AND CHAIN OIL
Mix gasoline (leaded or unleaded, alcohol-free) and quality proven 2-stroke motor oil (FC grade) for air
cooled 2-cycle engines.
Most engine troubles are caused, directly or indirectly, by the fuel used on the machine. Take special care
not to mix a motor oil for 4-cycle engines.
Chain Oil: Use motor oil SAE#10W-30 all year round or SAE#30-#40 in colder temperatures
1. Fill the fuel and chain oil tanks respectively and tighten the caps securely. (F7)
2. Set the switch to the “1” position (F8)
1. Chain Oil
2. Fuel
3. Switch
4.
5.
Throttle Level
6.
Throttle Interlock
Choke Knob
3. Pull out the choke knob to the closed position. (F10)
NOTE: When restarting immediately after stopping the engine, leave the choke
knob at the open position.
4. While holding the Chainsaw unit securely on the ground, pull the starter rope
vigorously. (F11)
5.
again to start the engine.
NOTE: After Starting the engine, run the chain at medium speed and see if the
chain oil is scattered off as shown. (F12)
STARTING THE ENGINE
ASSEMBLY AND OPERATION