Use and Care Manual
To prevent electric shock and death from incorrect grounding wire
connection read and follow these instructions:
Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded. DO NOT
modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. DO
NOT use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility
before use. If the plug will not t the outlet, have a proper outlet installed by a qualied electrician.
The tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with
all codes and ordinances.
The outlet must be properly installed and grounded in accordance with all codes and ordinances.
DO NOT use extension cords with this pump.
DO NOT use an adapter to connect this pump to a different outlet.
The fuse must be a residual current circuit-breaker with a measured residual current of no more than 30
mA.
Make sure the power supply corresponds with the connection specications of the device before it is
connected.
This pump may only be used within the specied limitations for voltage and power, see the type plate.
Check the plug and cable before each use.
If the power cable is damaged, immediately disconnect the plug. Never use this device if the power cord
is damaged.
Unplug the power cord when the device is not in use or when transporting.
SAFETY INSTRUCTIONS
CAUTION: This pump has been evaluated for use with water only.
Fluid Type: The Pump is designed for use with water with a maximum temperature of 77° F (25° C).
DO NOT use the pump for other uids, especially not fuels, cleaning uids, or other chemical
products.
NOT FOR POTABLE WATER
This device is not intended to be used for providing drinking water nor for food items.
Exposive, combustable, fecal matter or aggressive materials or substances which are hazardous must
not be conveyed by the device.
This device is not to be used for commercial or industrial use.
Improper use or modications to this device or the use of components not included with this device or
use of components that are not tested and approved by the manufacturer may result in damage and/or
serious injury.
2
GROUNDING INSTRUCTIONS