Replacement Part List
4
ASSEMBLY OPERATION
1. Connect the clipper of the yellow/green cable to a good earthing terminal to ensure user safety.
2. Put the oil of into the caddy through the oil input opening. Do not do this too quickly to avoid the oil from
owing from the end of the opening. Note the lever pointer (red) shows when the red pointer reaches the
highest limit of oil, do not add more oil at this point. Clean the lter meter to keep it from jamming.
3. Be sure the oil is clean and there are no dregs inside.
4. This machine adapts to gasoline, diesel etc but is not suitable for water sucking or other corrosive solvent.
5. Operate the machine in a horizontal position, not at an incline.