Manualshelf

Replacement Part List

ManualsBrandsStark ManualsGas Cans30 Gal. Portable Gas Caddy Fuel Transfer Storage Tank Rolling Gas Can with Rotary Pump Auto
123456
3
ASSEMBLY
1. Open the carton and take out the spare parts.
2. Wind the screw part of the pipe on the caddy with seal tape 5-8 circle.
3. Connect the oil pump to the pipe and tighten it. Control the pump handle
position to the outside direction of the caddy so it can turn. Turn the handle
of the pump it the OUT direction, the oil will be discharged from the caddy.
4. Turn the handle of the pump in the IN direction, the oil will be sucked into
the caddy. Assemble the handle to the pump and tighten it with a hex nut.
5. Wind the seal tape on the screw part on the head of the discharge pipe.
6. Connect the discharge pipe to the top of the pump and tighten it, asseble
the oil input opening.
7. Install the oil lever assembly on the top of the caddy. Loosen the red nut
of the lever assembly, lift the oil lever pointer slightly and the lever must be
up-down freeky. Tighten the red nut.
8. Assemble the caddy handle.