Use and Care Manual

Before do any maintenanceand inspection, ensure unplug the plug.
1. Inspecting the tool
Use a dull accessory, such as bull point, cutter, etc., will cause motor malfunction and efficiency
degraded. Replace with a new one when your accessory is abased.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Any loose
should be tighten immediately, failure to do maybe cause serious hazard.
3. Maintenance the motor
The motor is the heart of the machine, please avoid any damage to the winding, or any water
and oil to wet it.
5. Carbon brush replacements
5.1 Carbon brushes are consumable parts, when it becomes worn or "limit worn" it can cause
motor trouble, we use auto-stop carbon brush, it stopped automatically when carbon brush worn out,
at that time, replace a new couple of them as following procedure:
5.2 When you have to replacement the carbon brushes by yourself, please
following the order：
(1)Loosen the three set screwsand removefan cover,
(2)Remove the helical spring and carbon brushes.
(3) After replacing the carbon brushes, install the
helical spring and fan cover, with securely tightening
threeset screws.
6. Cleaning
Clean the machine regularly with a soft cloth, preferably after each use. Solvent such as
gasoline,thinner, alcohol etc.. These kind of chemical materials are not allowed to use, water or
soap are recommended!
7. Protecting the Environment
Do not dispose of power tools together with household waste material!
The machine,accessories and packaging should be sorted for environmental friendly
recycling.
In observance of European Directive on waste electrical and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
CAUTION:
Repair, modification and inspection of Stark Power tools must be must be carried out
by a
Stark Authorized Service Center.
In the operation and maintenance of power tools, the safety regulations and standards prescribed
in each country must be observed.
MODIFICATIONS:
Stark Power Tools are constantly being improved and modified to incorporate the latest
technological advancements. Accordingly, some parts (i.e. code numbers and/or design) may be
changed without prior notice.
8