Use and Care Manual

There is the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
Standard accessories
One box of grease
30g (one box)
Bull point chisel(18x350mm)
1 piece
flat chisel(18x350mm)
1 piece
Carbon brush(6*10*14mm)
2 pieces
Notice: Optional accessories (sold separately) are recommended only for Stark tool for
specified purpose in manual, any other brand accessories or attachments used may present risk of
injury.
1. Tine Chisel: 18*350mm (SDS max )
2. Flat Chisel : 18*350mm (SDS max )
3. Big Flat Chisel : 18*350mm (SDS max )
4. Goose Chisel :18*350mm (SDS max )
5. Surface Roughing (Hammering)
(1) Bushing Tool (2) Shank
6. Tamping (Hammering)
(1) Rammer (2) Shank (150 x 150 mm)
7.Lubricate grease one box 30g
Optional accessories are subject to change without notice.
2. Optional accessories (sold separately）
2