Use and Care Manual

Application
This hammer should be applied to breaking concrete,chipping offconcrete, grooving, bar cutting, and
driving piles in installation of piping and wiring,unitary facility installation, machinery installation water
supply, and drainage work, interior jobs, harbor facilities and other civil engineering worketc.
Contents
1. Machine information
2. Optional accessories
3. Safety instruction
4. Assembly
5. Operation
6. Maintenance
Tech
nical Data
105 dB(A)
Wear hearing protection while operating the power tool.
The declared vibration total value has been measured in accordance with a standard test
method and may
be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning
The vibration emission during actual use of the power tool can differ from the declared total
value depending on the ways in which the tool is used.
1. Machine information
1
Impact energy 11J, 8 Ft/Lbs
Vibration
"Chiselling" ah,Cheq 13.125 m/s
2
, k=1.5m/s
2
Noise:
Sound pressure level L
pA
85.68 dB(A)
Sound power level L
WA
99.68 dB(A)
Uncertainty K
3 dB(A)
Guaranteed sound power level
(according to 2000/14/EC) “Chiselling
mode”:
Machine Type
61133
Voltage AC 110V
Frequency 60Hz
Input power 1200W
Impact rate 3100/min
Chisel positioning 12 Step
Weight(W/O cord) 12.56LBS