Use and Care Manual
1
WARNING AVOID INJURY: This machine is capable of crushing and/or amputating body parts. Failure
to observe the safety instructions in this manual and decals could result in serious injury and death.
ALWAYS stop the unit and engine, remove the key and allow moving parts to stop before leaving the
operator’s position.
IMPORTANT SAFETY INFORMATION
Read and understand the operator’s manual and decals on the unit. This information is for your safety
and the proper use of this equipment. Failure to follow these instructions and warnings may cause seri-
ous injury or death. Familiarize yourself and any other operators with all controls and the safe use of all
the features of this unit. If you rent, loan or sell this product, be sure to provide this manual.
NEVER allow children to operate or play on or near the equipment. NEVER allow adults to operate the
equipment without thoroughly reading and understanding the instructions in this manual.
Keep the area of operation clear of all persons, particularly small children. Be alert and shut off the unit
if children are nearby.
ALWAYS remove the key and/or wire from spark plug before assembly, maintenance or service.
Unintentional engine start up can cause serious injuries.
DO NOT run or jog when pushing the machine. Walk at a normal pace only.
Keep your body and clothes away from the heating or rotating parts of this machine. DO NOT wear loose
clothes, neckties or necklaces while operating this machine.
DO NOT use this machine on bumpy or steep surfaces. Exercise caution to avoid slipping and falling.
Inspect that all nuts, bolts and brush rollers are tight and well connected to ensure the safety and reliability
of this unit prior to operation.
Adjust the clutch pull cable to ensure it is exible and reliable.
Adjust the brush to proper height prior to operation.
If the machine strikes a foreign object or starts to vibrate abnormally, stop and turn off the machine and
check immediately for the obstruction.
Adjust the clutch pull cable to ensure it is exible and reliable.
Adjust the brush to proper height prior to operation.
Stop the engine and pull out the spark plug whenever you leave the operating position before making
any repairs or adjustments.
Inspect the air pressure in the tires prior to use and pay attention to sharp objects when using this unit to
prevent the tire from being pierced.
Replace worn components before operating this machine.
Wear safety gear when operating this machine. It is recommended to wear goggles, ear protection and
work boots when operating this machine.
Inspect the machine prior to use and make sure the fuel tank is full.
To reduce the risk of injury associated with exhaust fume inhalation. DO NOT operate in an unventilated
area.