Replacement Part List
MAINTENANCE
Refer to the engine manual packed separately with your unit for information on how to check or add oil/fuel and
for recommendations.
ENGINE OIL/FUEL
Refer to the engine manual packed separately with your unit for detailed information and a maintenance schedule.
ENGINE MAINTENANCE
If the walk-behind blower will not be used for a period longer than 30 days, follow the steps below to prepare
your unit for storage.
1. Drain the fuel tank completely. Stored fuel containing ethanol or MTBE can start to go stale in 30 days. Stale
fuel has high gum content and can clog the carburetor and restrict fuel ow.
2. Start the engine and run until it stops. This helps prevent gum deposits from forming inside the carburetor and
possible engine damage.
3. While the engine is still warm, drain the oil from the engine. Rell with fresh oil of the grade recommended in
the Engine Manual.
4. Use clean cloths to clean off the outside of the machine and to keep the air vents free of obstructions.
STORAGE
5. Inspect for any loose or damaged parts. Repair or replace damaged parts and tighten loose screws, nuts or
bolts.
6. Store your unit on at ground in a clean, dry building that has good ventilation.
Do not store the machine with fuel in a non-ventilated area where fuel fumes may reach ame, sparks, pilot lights
or any ignition sources.
14