Replacement Part List

MAINTENANCE
1. Turn off the engine. The engine must be cool.
2. Keep the engine’s throttle lever in its SLOW position and remove the spark plug wire from the spark plug and
secure
3. Inspect the general condition of the blower. Check for loose screws, misalignment of binding of moving parts,
cracked or broken parts, and any other condition that may affect its safe operation.
PREVENTIVE MAINTENANCE
4. Remove all debris from the blower with a soft brush, vacuum, or compressed air. Then use a premium quality
lightweight machine oil to lubricate all moving parts
5. Replace the spark plug wire.
Never use a pressure washer to clean your blower. Water can penetrate tight areas of the unit and cause
damage to spindles, pulleys, bearings, or the engine.
Shut down the engine, wait for all moving parts to come to a complete stop, remove the spark plug wire,
and then wait ve minutes before performing maintenance on the blower.
The service intervals shown are the maximum under normal operating conditions. Increase frequencies under
extremely dirty or dusty conditions.
REGULAR MAINTENANCE CHECKLIST
13 14