Replacement Part List

PRODUCT INFORMATION
THROTTLE CONTROL LEVER
Regulates the speed of engine. Moving towards H to
speed up the engine. Moving towards L to lower the
engine speed.
FLOW ANGLE ADJUSTMENT CONTROL LEVER
Adjusts the direction of air ow between 7 positions.
FAN HOUSING
Contains the fan.
INTAKE GUARD
Prevents ngers, hands, or large debris from entering
the fan housing and contacting the fan blades.
FRONT SWIVEL CASTER
360 degree swiveling caster to allow for maneuverability.
DISCHARGE CHUTE
Directs air ow to the left side of the unit from machine
operator’s position.
FRONT DISCHARGE CHUTE
Redirects the air ow toward the front of the unit.
FLOW ANGLE ADJUSTMENT INDEX LEVER
Transits the movement from control lever to the air ow
louver.
RECOIL STARTER HANDLE
Used to pull-start the engine.
THROTTLE CONTROL
The throttle control regulates the speed of the engine,
and moves between FAST, SLOW and STOP positions.
When the throttle control is moved to the STOP position,
the engine will STOP.
CHOKE CONTROL
The choke control is used to choke the carburetor
and assist in starting the engine. The choke control
is slides between the CHOKE CLOSE and CHOKE
OPEN positions. The CLOSE position enriches the
fuel mixture for starting a cold engine.
The OPEN position provides the correct fuel mixture
for operation after starting, and for restarting a warm
engine.
FUEL VALVE LEVER
The fuel valve opens and closes the passage between
the fuel tank and the carburetor.
The fuel valve lever must be in the ON position for the
engine to run.
When the engine is not in use, leave the fuel valve
lever in the OFF position to prevent carburetor ooding
and to reduce the possibility of fuel leakage.
9 10