Replacement Part List

9
B.Remove spark plug，clean and adjust the spark plug gap to
0.6-0.7mm (0.02-0.03 in.). Fig-15
C.drain the motor oil of the engine and replace with new
specified oil． Fig-16
! NOTE：When the engine is new，the first oil change must be
made after 20 hours of operation and replenish the oil tank
before operating．
7-3. Monthly Service
Change the oil in the vibrator assembly．
7-4. Storage
When storing the compactor for long periods after
operation．
A. Thoroughly drain the fuel from the fuel tank fuel
pipe and carburetor．
B. Pour a few drops of motor Oil into the cylinder by
removing the spark plug．
Rotate the engine several times by hand SO that the
cylinder interior is covered with oil．
C. Clean the outer surface of the machine with an oil
moistened cloth．Cover the unit and store in a
humidity-free．dust-free area．
CARE AND PREVENTIVE MAINTENANCE
Check the oil level in the motor crankcase daily．
Check the vibrator oil level weekly．
Inspect the rubber anti vibration mounts for wear or
deterioration．
Clean the underside of the plate regularly to prevent a build up of
material．
SERVICE
Change the oil in the motor crankcase regularly to minimise
Wear．
Inspect, clean and/or replace the motor air cleaner regularly,
particularly when operating in a dusty environment．
Inspect，clean and/or replace the spark plug regularly
Check all fasteners for tightness as the machine is subject to
vibration．
Check v belt tension，wear and that it is running true, adjust or
replace as required．