Use and Care Manual

3.1.2 NEVER allow anyone to operate this equipment without proper training. People
operating this equipment must be familiar with the risks and hazards
associated with it.
3.1.3 NEVER touch the engine or muffler while the engine is on or immediately
after it has been turned off．These areas get hot and may cause burns．
3.1.4 NEVER use accessories or attachments that are not recommended by
us．Damage to equipment and injury to the user may result.
3.1.5 NEVER leave machine running unattended．
3.1.6 NEVER tamper with or disable the function of operating controls．
3.1.7 NEVER use choke to stop engine．
3.1.8 NEVER operate the machine in areas where explosions may occur．
3.1.9 ALWAYS read，understand，and follow procedures in the Operator's Manual
before attempting to operate the equipment．
3.1.10 ALWAYS be sure that all other persons are at a safe distance from the
machine. Stop the machine if people step into the working area of the
machine．
3.1.11 ALWAYS be sure operator is familiar with proper safety precautions and
operation techniques before using machine．
3.1.1 2 ALWAYS wear protective clothing appropriate to the job site when operating
equipment．
3.1.13 ALWAYS wear hearing protection when operating equipment．
3.1.14 ALWAYS keep hands，feet，and loose clothing away from moving parts of the
machine．
3.1.15 ALWAYS use common sense and caution when operating the machine．
3.1.16 ALWAYS be sure the rammer will not tip over，roll，slide，or fall when not
being operated．
3.1.17 ALWAYS turn the engine OFF when the rammer is not being operated．
3.1.18 ALWAYS guide the rammer in such a way that the operator is not squeezed
between the rammer and solid objects．Special care is required when working
on uneven ground or when compacting coarse material．Make sure to stand
firmly when operating the machine under such conditions．
3.1.19 ALWAYS Operate the rammer in such a way that there is no danger of it
turning over or falling in, when working near the edges of breaks, pits, Slopes.