Installation Guide

5
NOTICE: If the cause of the obstruction is unknown, use the bulb cutter to explore the obstruction. If
possible, retreive a piece to inspect. Once you can see the cause of the obstruction, select the appropriate
tool for the job. Run the smallest available tool through the blockage to allow the backed up water to ow
and carry away the debris as the drain is cleaned. Once the drain is owing, more appropriate tools can
be used on the rest of the blockage. Keep in mind that the largest tool used should be no bigger than the
drain’s diameter, minus an inch.
If properly used, the drain cleaners and assorted drain cleaner accessories will not damage a drain that
is in good condition and properly designed, constructed and maintained. However, if the drain is in poor
condition or has not been properly designed, the drain cleaning work may damage the drain. Before
operation visually inspect the drain’s quality.
ASSEMBLY