Installation Guide
GENERAL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to follow the warnings and instructions may
result in electric shock, re and/or serious injury. Save all warnings and instructions for future
reference.
SAFETY
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be supplied by the operator. Read
carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure
to follow the safety rules and other basic safety precautions may result in serious personal injury.
Read and understand all instructions. Failure to follow all instructions may result in serious injury or
property damage.
DO NOT allow persons to operate or assemble the product until they have read this manual and have
developed a thorough understanding of how it works.
DO NOT modify this product in any way. Unauthorized modication may impair the function and/or
safety and could affect the life of the product. There are specic applications for which the product was
designed.
Keep children and bystanders away from the work area while operating the tool. DO NOT allow
children to handle the product.
Grounded tools must be plugged into an outlet that is properly installed and grounded in accordance
with all codes and ordinances. NEVER remove the grounding prong or modify the plug in any way.
Double insulated tools are equipped with a polarized plug. Double insulation eliminates the need for a
three wire grounded power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is grounded.
DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
DO NOT abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
When operating this tool outdoors, use an extension cord marked with “W-A” or “W”. These extension
cords are rated for outdoor use and reduce the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a Ground Fault circuit Interrupter (GFcI)
protected supply.
1
DO NOT leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool and unplug
it from its electrical outlet before leaving.
DO NOT Do not smoke during use. Nicotine reduces the blood supply to the hands and ngers, increasing
the risk of vibration-related injury.
IMPORTANT SAFETY INFORMATION