User Manual

Technical Data
Parameter
Units of
measurement
Value
Type of model
-
ECS-2510
Supply voltage
V AC
230
Current frequency
Hz
50
Rated power
kW
2.5
Drive link count
-
57
Chain pitch
inch “
3/8
Chain gauge
inch “ (mm)
.050 (1.3)
Saw chain oil
-
SAE 10W30
Oil tank capacity
ml
125
Saw chain speed (no load)
m/s
14
Chain brake activation time
s
0.12
Recommended guide-bar
length
min - max
350 - 400 mm, (14” - 16”)
Cutting length with guide-bar
350 mm (14”)
mm
340
Cutting length with guide-bar
400 mm (16”)
mm
390
Protection class
-
II
Description of drawing on the second page:
1. On/Off Switch.
2. Power cord hook.
3. Rear handle.
4. Switch lock button.
5. Oil tank cap.
6. Front handle.
7. Chain brake lever / front hand guard.
8. Saw chain.
9. Guide bar.
10. Nose sprocket.
11. Chain tension adjustment screw.
12. Bar fastening nut.
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire and / or severe injuries. Keep
these instructions in a safe place.
1.1. Safe operation of electric chain saws.
Warning! Persons unfamiliar with instruction manual are not allowed to use chain saw.
Use the chain saw for cutting wood only.
Other use of the chain saw is the sole responsibility of the user who should bear in mind that it may be dangerous.
The manufacturer is not responsible for losses and damages resulting from unintended use of the chain saw.
1.2. Workplace. Work area safety.
Keep your workplace tidy and ensure it is well lit.
Untidiness and insufficient illumination contribute to accidents especially when chain saws are in use.
Keep children and bystanders away from the workplace.
Distraction may cause loss of control over the tool.
1.3. Safety when working with electricity.
1.3.1. Plug of the chain saw must be suitable for contact. In no case is allowed to modify the structure of the plug. When working with
electrical zero, do not use plug adapters.