User Manual

1
Dear customer!
Require the test work of the machine as well as checking the whole set of accessories
supplied when buying. Make sure that the warranty coupon is properly filled in and
contains the date of purchasing, stamp and signature of the seller.
Read carefully this manual and observe all the rules described before the first operating of
the machine.
Keep this manual during the term of the using of the product.
Application area
The impact drill ID 700 is the tool for drilling the holes in different materials (metal,
wood, plastic etc.).
The drill can be used for drilling the holes in concrete, stone and similar materials using
the hard-alloyed drilling bits. The work should be done carefully without overloading of
the machine.
Attention! Strong pollution of inner parts of the tool by products of
processing is infringement of conditions of operation of the machine and the
grounds for refusal of the manufacturer warranty repair.
The drill have the electronic system of regulation of rotation speed and the system of the
reversal rotation. This feature allows the tools to be used for screwing screws.
Double insulation prevents the injure by electric current.
The machine is not for the professional use.
The use of the tool not for purposes described in the manual is strictly prohibited.
In connection with ongoing efforts to enhance the machine’s functionality manufacturer
reserves the right for the minor alterations which are not reflected in the present guide
which will not affect the efficient and safe operation of the machine.