User Manual

Fig 1 Machine side view ID 910 Profi

1. Switch;

2. Rotation speed adjustment wheel;

3. Reverse switch;

4. Lock-on button;

5. Drilling/impact drilling mode switch;

6. Chuck;

7. Side handle.

Operational instruction

Attention!

It is possible to encounter wire, gas or water pipes hidden in a wall while drilling. It is

recommended to examine preliminarily a working zone, for example, by the metal

detector.

Before work

Check network voltage: it should conform to the data on the machine’s label. Tool

labeled with the 230 V, can be also connected to a power source with a voltage of 220

volts.

Attention!