User manual

Step 2 Remove the Tray and install your hard disk onto the tray. Make sure the hard disk secure screws
are fastened to avoid unnecessary movements to the hard disk.
Step 3 Once the hard disks have been installed, insert the removable trays into appropriate positions of
the SR3610 unit and close the handles to secure the disks.
Step 4 Connect the cables included to the appropriate ports of the SR3610 and your PC system.
Step 5 Turn on the power of the SR3610. Wait for the LCD display to show the OK message before
turning on your PC system.
Installation Complete. Your operation system will automatically identify the new hardware and once
recognized, follow the operating system’s instructions to format the hard disks. Once the formatting is
complete the device is then ready for operation.